84
submitted 1 year ago by yokonzo@lemmy.world to c/asklemmy@lemmy.ml

I’m thinking about proposing to my girl, however we both think diamonds as a standard is stupid and overrated, we both prefer much more colorful and comparatively cheaper gemstones like rubies and sapphires, but I’m having trouble finding a good place for that, I’ve never done this before, any ideas?

top 50 comments
sorted by: hot top controversial new old
[-] RalphWolf@lemmy.ca 36 points 1 year ago

Consider "moissanite". Beautiful manufactured gemstones that look very much like diamonds but are a fraction of the price.

[-] Fried_out_Kombi@lemmy.world 36 points 1 year ago* (last edited 1 year ago)

They don't just look like diamond; chemically they're extremely similar, too. Diamond is just a bunch of carbon atoms covalently bonded together into a 3D crystal, which is why they're so incredibly hard. Moissanite is basically the same but it's carbon and silicon atoms mixed together. Silicon has the same number of valence electrons, so it can function similarly chemically as carbon, hence why it works. Thus, moissanite is also extremely hard and refracts light in beautiful ways, too, except imo even more beautifully. Instead of a colorless luster, it's a subtle rainbow luster to moissanite.

Source: I got my fiancée a moissanite ring, and it's lovely. And because it's lab-made, I got her blue moissanite (the coloring is just from adding certain impurities) that matches our cat's eyes perfectly. It's way more unique, cheaper, and more ethical than diamond, but doesn't sacrifice on quality one bit.

[-] flicker@kbin.social 11 points 1 year ago

Yessss.

My ring is moissanite and it's got a rainbow flash (instead of the boring diamond one). It cost just over a hundred off etsy and it has no slavery involved! I love it!

Moissanite is the way to go!

[-] tacotroubles@lemmy.world 6 points 1 year ago

And a more interesting luster IMO

[-] RalphWolf@lemmy.ca 2 points 1 year ago

Yes, very...I believe the technical term is "sparkly". Lol. But seriously, they're amazing.

[-] orangeNgreen@lemmy.world 21 points 1 year ago

I got my wife’s engagement ring off Etsy. It’s “smokey topaz” and the exact style she wanted, and was very inexpensive. She loves it.

[-] MooseLad@lemmy.world 9 points 1 year ago

Second for Etsy, that's where I got both of my wife's rings and she loves them.

[-] PanaX@lemmy.ml 6 points 1 year ago

Thirded for etsy. i went with simple bands of high quality metals. Silver at first then gold for the tenth. They're quite attractive.

[-] DirigibleProtein@aussie.zone 4 points 1 year ago

We got a tungsten band with sapphires from Etsy. She hunted the web to find exactly what she wanted; custom made to her size and a fraction of the cost of diamonds.

[-] PanaX@lemmy.ml 2 points 1 year ago

We bought both from this store:

https://www.etsy.com/shop/SpiritWolfArts?ref=usf_2020

Very impressive, hand made, Salish style bands. I worked recommend him to anyone.

[-] Hobart_the_GoKart@lemm.ee 9 points 1 year ago

I have a moissonite ring, but it looks very much like a diamond. If you're looking for something different, I would check antique stores or estate sales to look for a second hand gem. You can always have it put in a new setting if the ring is too dated for your tastes.

[-] bitsplease@lemmy.ml 7 points 1 year ago

My wife's engagement ring is also Moissanite and she loves it. It looks like a $20k ring to anyone but a jeweler (honestly I regret going with as big of a stone as I did, but my wife loves it), but I "only" spent $2.5k on it

Plus Moissanite is harder and has a higher brilliance than diamond. A great alternative for people who don't want to waste money on diamonds, but still want a "traditional" ring

[-] thirteene@lemmy.world 5 points 1 year ago

I'm holding a 25mm moissanite that I bought for fun because it's the roughly the same size as the hope diamond and it was $250 without a certificate. There's a ton of competition now so prices have started dropping. A 10mm is ~3.9ct and the loose gem is < $100 on the first link. The rest is just the cost of the ring. Adding silicon to the carbon makes it slightly softer, but significantly less prone to cracking which was a common failure point.

Regarding OPs original question, it's very hard to verify things online. I'm barely a hobbyist so I can't make recommendations, but be aware a lot of glass is shipped from India. The best you can do is be sure to read reviews and try to do your due difference. A lot of gems can be grown in labs but if you are investing in hardware, you are going to grow diamonds (moissanite) because they have the highest value. If you do opt into a traditional ring, certificates for moissanite are not the same as diamonds. They are closer to receipts to verify what it is, and you typically want to see the certificate id engraved into the stone.

[-] Hobart_the_GoKart@lemm.ee 3 points 1 year ago

Yes, my stone is a full carat because my husband wanted a round number I guess haha. Anyway, it does look rather opulent given our economic status, but I Iike it and it fit his budget.

[-] bitsplease@lemmy.ml 3 points 1 year ago

I honestly can't remember the exact size, but in retrospect it definetely looks a bit gawdy by my usual standards 😅

[-] Thavron@lemmy.ca 3 points 1 year ago

It still seems fucking insane to me to spend 2,5k on a ring but you do you.

[-] bitsplease@lemmy.ml 5 points 1 year ago

It's a piece of jewelry she wears literally every day of her life and she loves it - I'd say we got our money's worth even by now, let alone over the coming decades

[-] investorsexchange@lemmy.ca 9 points 1 year ago

Find a custom jeweller. I wanted to get my wife’s ring remade after 10 years, and it was far less expensive than I expected. And they can give you great ideas.

[-] Chetzemoka@startrek.website 8 points 1 year ago

I'm gonna chime in to also recommend Etsy. There are a lot of great quality producers and not only craft-table-in-the-corner-hobbyists who sell things on Etsy. That would be the first place I'd look. Etsy product reviews are pretty reliable as well.

[-] TheDubz87@lemmy.world 7 points 1 year ago

I got my wife's ring on etsy. It's pearl and opal, but there are a good bit of jewlers on etsy. I would do a bit of research on the shop before you buy though.

[-] Salix@sh.itjust.works 7 points 1 year ago
[-] Joe_Moose@lemmy.world 6 points 1 year ago

Go to a small local jeweler. They can often make you something custom for much less than the price of a chain store. They'll also be able to walk you through all the options and advantages of each. If you're having trouble finding that little mom and pop spot, Google jewelry repair. 9 out of 10 of those businesses will be more than happy to take on your project.

[-] RoquetteQueen@sh.itjust.works 6 points 1 year ago

Etsy has gotten worse since I got engaged, but that's where my ring is from. We went for sterling silver and it was $150.

[-] AFKBRBChocolate@lemmy.world 5 points 1 year ago

Some cities have a jewelry district, and those are very worth going to. The one in downtown Los Angeles is drivable for me, and I've saved huge amounts going there. You can also usually get someone to make something custom for you there that doesn't cost a lot more. I've bought loose gems and had them set a few times and the cost was less than half of a mall jeweler for something much better quality.

[-] luthis@lemmy.nz 5 points 1 year ago

Moissonite, have you checked that?

[-] Justas@sh.itjust.works 5 points 1 year ago

I also went with moissanite but my extra advice would be to get a ring where the stone is set deeper inside the ring so it doesn't get caught in her hair, fabrics, etc.

[-] BonesOfTheMoon@lemmy.world 4 points 1 year ago

Costco has some good options

[-] YourFavouriteNPC@feddit.de 4 points 1 year ago

I got my wife a Swarovski ring back then because that's what she wanted. Looks just as nice as any diamond ring, unless you really inspect it closely. And they come in all kinds of colors.

[-] ChuckLopez@lemmy.world 3 points 1 year ago

I bought my wife’s ring from Diamondère. She wanted a sapphire and they have a lot of non diamond options.

[-] sexual_tomato@lemmy.dbzer0.com 3 points 1 year ago

Any independent jeweler can help you out.

I will say one practical consideration is that diamonds are really hard and don't get scratched. You may want to consider hardness for any replacement gemstone (rubies and sapphires are the next hardest).

[-] Saigonauticon@voltage.vn 3 points 1 year ago

Perhaps go on a trip together, somewhere far and strange.

Pick up a ring there, adorn it with memories instead of stones. Asia has a lot of nice gold, no-diamond options. For example, a typical price for a nice gold ring (wedding/engagement type) in Vietnam is about around 400$ a pair (I live in Vietnam). You'll have the choice of many designs.

[-] wuphysics87@lemmy.ml 3 points 1 year ago

A friend in grad school made two on a lathe in the machine shop

[-] RBWells@lemmy.world 3 points 1 year ago* (last edited 1 year ago)

Another vote for moissanite. It's gorgeous and strong and not expensive.

Don't look for "engagement ring" if you are looking for ruby or sapphire or emerald, just look for "emerald ring". Also, if you find a stone you like, any jeweler can make it into a nice ring, in a style your fiancee (hopefully) prefers. So don't worry much about the setting. If you love the stone in, say, a pendant, buy that and y'all can have it made into a ring she actually likes later.

[-] Strae@lemmy.world 3 points 1 year ago

My wife found an Emerald ring she really liked from more of a boutique style jewelry store owned by a young woman. It had the vibe of a brick-and-mortar Etsy store. We went to a few old school jewelers and hated the experience. It felt like we were being scammed by some slimy diamond dealer.

[-] yoreel@lemmy.ml 3 points 1 year ago

Check out moissanite. It's like a diamond, but cheaper, can only be found in 2 places: on meteorites, or grown in a lab. I got my wife's ring on etsy from a jeweler there.

[-] dillydogg@lemmy.one 2 points 1 year ago

When I proposed, I went to a local jeweler and we talked through what kind of stones to use. We went with a beautiful sapphire that has a number of different colors in it.

[-] FireTower@lemmy.world 2 points 1 year ago

Possibly stupid question but are you just looking online or have you tried going to a jeweler's shop? They should have a variety of non diamond rings and an employee knowledgeable enough to find you something that fits your budget and suits your needs.

[-] dandroid@dandroid.app 2 points 1 year ago

My wife and I got moissanite from a local jewelry store. 1/10th the cost of diamond and we both think it looks better.

[-] toomanyjoints69@lemmygrad.ml 2 points 1 year ago

Dollar Tree has a lot of budget options in the toy section.

[-] swab148@startrek.website 2 points 1 year ago

People downvoting you have never seen Bill & Ted.

[-] toomanyjoints69@lemmygrad.ml 1 points 1 year ago
[-] Rhoeri@lemmy.world 1 points 1 year ago

Any jeweler.

load more comments
view more: next ›
this post was submitted on 18 Oct 2023
84 points (97.7% liked)

Asklemmy

44197 readers
1054 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS