284
top 46 comments
sorted by: hot top controversial new old
[-] webghost0101@sopuli.xyz 192 points 1 month ago* (last edited 1 month ago)

The problem here is that the led was software controlled which always struck me as more of a bandaid then a solution.

A proper hardware switch solution would mean the led and webcam are wired so if the webcam receives any power the led jumps on. The computer shouldn't even know that led exists. Not sure how many devices actually do this though.

The tape on cam solution works on video but might still record sound which is in many cases more dangerous for sensitive information.

Of course one also has to wonder how much it matters having typed this on a phone with cam and microphone uncovered and no indicators.

[-] Voroxpete@sh.itjust.works 54 points 1 month ago

Yeah, this is exactly the problem. Never should have been software controlled.

And yes, it's getting harder and harder to control for these privacy issues with the number of devices we routinely carry with microphones and cameras.

[-] orclev@lemmy.world 35 points 1 month ago

I believe Framework has their webcam LED setup like this. At a minimum the physical switch cuts power to the whole webcam assembly.

[-] GreatBlue@infosec.pub 23 points 1 month ago* (last edited 1 month ago)

And the Framework Laptop also has a switch for the mic. So even the mic can be completely turned of on the hardware level.

[-] JTheFox@lemmy.world 19 points 1 month ago* (last edited 1 month ago)

That is exactly how the webcam light is setup in a Framework. The light is wired up to the camera sensors power, so whenever the camera has power, so does the light. The switch also fully disconnects it from the computer itself. At least in Linux, you can verify it using lsusb. You can see the camera indicated as Realtek Semiconductor Corp. Laptop Camera. Whenever the switch is flipped though, it disappears all together from the list.

[-] macarthur_park@lemmy.world 10 points 1 month ago

I believe apple has the led hardwire in MacBooks webcams.

[-] ayyy@sh.itjust.works 5 points 1 month ago

Used to, but not anymore. I recall a similar exploit for MacBooks a few years back.

[-] catloaf@lemm.ee 1 points 1 month ago

The problem with that is a USB device is powered even if it's not being used. You can't communicate with it to identify it as a webcam without powering it. So the light will be on any time it's plugged in.

[-] VieuxQueb@lemmy.ca 23 points 1 month ago

The camera module itself can be powered off if properly designed and the led should be powered from the same source.

[-] catloaf@lemm.ee 0 points 1 month ago

Yeah, but that's additional design complexity, and most consumers, given the choice, would pick the cheaper option.

[-] EtherWhack@lemmy.world 6 points 1 month ago

It's more complex and expensive to have it controlled by software though.

Hardware controlled would be the equivalence of using a splitter to add a second lamp on an outlet attached to a light switch. (would only require a change in a trace or two and a transistor/resistor or two.)

Software controlled is the equivalence having to buy smart outlets and programming them yourself to have the two lamps turn on at the same time. (requires the same as a hardware switch, plus a more expensive or even an extra controller chip along with the need to write and program it.)

[-] sem@lemmy.blahaj.zone 4 points 1 month ago

Could be interesting to have a law that made this cheaper option illegal as it is more dangerous to society

[-] MonkderVierte@lemmy.ml 3 points 1 month ago

a USB device is powered even if it's not being used.

That's the USB-controller, not the actual cam. It's certainly possible to couple a LED with the power state of the camera chip and it was already done before.

[-] fl42v@lemmy.ml 0 points 1 month ago

Both android and crapple phones have mic & cam indicators nowadays, tho, and if a piece of software has a level of access high enough to bypass those, you kinda have bigger issues... Also, the webcam receives power by default currently; as the repo mentions, it's just another USB device (well, it's 3v3, and not 5v, but it doesn't really matter here)

[-] rottingleaf@lemmy.world 51 points 1 month ago

IMHO both camera and microphone should have a physical switch disconnecting them.

[-] MentalEdge@sopuli.xyz 40 points 1 month ago* (last edited 1 month ago)

And you know, the led shouldn't be fucking firmware controlled!

It's a really good idea, but to work reliably, it should be HARDWIRED to light up when the cmos is receiving power.

[-] Manifish_Destiny@lemmy.world 2 points 1 month ago

It feels intentional to fuck this one up.

[-] sugar_in_your_tea@sh.itjust.works 17 points 1 month ago

On phones and tablets as well.

[-] billiam0202@lemmy.world 9 points 1 month ago

Framework laptops do this- and the switch that kills the camera also slides a shutter over the lens as well.

[-] GbyBE@discuss.tchncs.de 5 points 1 month ago

Oh, mine only seems to physically disconnect the camera and not slide anything in front of the lens. Do you have the 16?

That lens cover also seems unnecessary to me. A physical disconnect for the camera and microphone is a nice touch of Framework's laptops...

[-] billiam0202@lemmy.world 3 points 1 month ago

No, I have the 13. Although I'm not in front of it right now, so I could be misremembering.

[-] jet@hackertalks.com 20 points 1 month ago

I just use some gaffers tape to cover the camera.

One complaint I have is a lot of laptop manufacturers who do put a camera slider in, paint the slider red when it's closed and black when it's open. It should be the opposite. Red is dangerous live.

I fix it just using some enameled nail polish. But it seems opposite of what it should be

[-] catloaf@lemm.ee 10 points 1 month ago

That's not possible, because the sensor is black (or at least very dark).

[-] jet@hackertalks.com 19 points 1 month ago

Right, but the ring around the sensor is plastic. That plastic could be red. To indicate that the camera is uncovered

[-] sugar_in_your_tea@sh.itjust.works 1 points 1 month ago
[-] jet@hackertalks.com 2 points 1 month ago

Plug in a dummy headphone jack. But some microphones are not disabled in hardware when that happens.

The framework laptop does have a hardware switch for that, which is nice

[-] roguetrick@lemmy.world 1 points 1 month ago

They have it that way because it reduces the support calls from idiots who can't figure out why their webcam won't work.

[-] Kelly@lemmy.world 13 points 1 month ago

Most laptops have a physical slider that can mask the camera. But I don't know of any tablets or phones that offer this feature.

[-] PetteriPano@lemmy.world 6 points 1 month ago

I have a thin stick-on slider for my laptops. It'd look clunky, but you can stick it on any tablet or phone.

[-] iturnedintoanewt@lemm.ee 8 points 1 month ago

Except these days the camera is a hole in the screen in a mobile phone, so you'd be effectively blocking part of the screen too.

[-] SaltySalamander@fedia.io 1 points 1 month ago

That hole in the screen is always black, so covering up the hole (and only the hole) won't make you miss a thing.

[-] Akip@discuss.tchncs.de 4 points 1 month ago

or get a phone that you can trust

[-] sugar_in_your_tea@sh.itjust.works 5 points 1 month ago* (last edited 1 month ago)

Those pretty much don't exist.

Here are the list of phones I trust, in order:

  1. Librem 5
  2. PinePhone
  3. Pixel w/ GrapheneOS

I'm on 3, because 1 & 2 don't function well enough as phones (need reliable MMS, better audio, and better battery life). The first two have hardware switches, the last is controllable by software I somewhat trust. All three have significant caveats. Once 1 or 2 work properly as phones (don't even need Android apps), I'll switch.

Obligatory: Librem 5 and their entire company is a scam. Louis Rossmann talked about it.

[-] jcs@lemmy.world 1 points 1 month ago

Purism is slowly correcting course regarding refund policies, but meaningful improvements take time. Also, the letter from "Purism" to Rossmann came from a Purism volunteer who had no authority to publicly represent the company.

[-] sugar_in_your_tea@sh.itjust.works 1 points 1 month ago

Yup, but that doesn't change how much I trust the hardware. I'm never going to buy from them, but I do think their phone hardware is decent. If I buy a Linux phone, it'll be a PinePhone.

[-] iturnedintoanewt@lemm.ee 1 points 1 month ago

Yeah..but usually the the sticker ones with a slide have a space where the cover slides to, and all that space will be over the screen. Unless you want to permanently cover the punch-hole camera.

[-] SaltySalamander@fedia.io 1 points 1 month ago

Unless you want to permanently cover the punch-hole camera

[-] noodlejetski@lemm.ee 2 points 1 month ago

there used to be phones with pop-up cameras for a year or two.

[-] jcs@lemmy.world 2 points 1 month ago

The Librem 5 offers hardware killswitches on the side of the phone, and the Pinephone offers hardware killswitches in the rear of the device after removing the backplate.

[-] datavoid@lemmy.ml 8 points 1 month ago

Anyone else ever join large conference calls from the shower?

[-] jagged_circle@feddit.nl 3 points 1 month ago

Shower? No.

Naked? More times than clothed.

[-] Ensign_Crab@lemmy.world 8 points 1 month ago

It can't turn off electrical tape.

[-] ipkpjersi@lemmy.ml 7 points 1 month ago* (last edited 1 month ago)

This is why so many laptops, including Lenovo laptops, have webcam covers. You could always put a piece of tape over it lol

[-] sirico@feddit.uk 4 points 1 month ago

Most Thinkpad's have a slidy cover not sure about the mics though

[-] Hupf@feddit.org 1 points 1 month ago
this post was submitted on 29 Nov 2024
284 points (98.3% liked)

Technology

60352 readers
5419 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 2 years ago
MODERATORS