I'm focused on NES, SNES, N64, Master System, and Genesis at the moment. I've just about reached the end of the cheap NES games and bought an Everdrive N8 Pro earlier this year. Mainly for ROM translations and homebrew, but I will admit to playing some of the higher dollar games on it. I'd much rather play actual carts though.

For me personally, I've found that I'll go upwards of $60+ for a RPG or meatier action adventure game, but haven't so far spent more than that on any of the consoles.

I've also opted to buy ports over original games in some cases. Chrono Trigger for example, I won't spend $250 on it so I bought the Japanese DS port since it was $30 shipped and supports English out of the box.

It's stupid cheap on Steam right now and I've never played it. I've been doing 100% of my gaming on the deck, which has me wondering how well this plays on it. Not graphically/performance because it'll clearly run on a toaster. But mechanically. Are there parts that are hard to use controllers vs kb/mouse for?

Now that I think about it, is there a resource that speaks specifically to this sort of question for games? I know of protondb but that seems to be focused on getting it to run easily and with good performance.

EDIT: thanks for the input! I've purchased it and I'm stoked to give it a playthrough. I WFH, so the thought of sitting at the same desk I was just at for 8+ hrs to game is not at all appealing. Been loving the deck for this exact reason!

I have really been loving my steam deck lately. I've now played through Fallout 3, New Vegas, all of their respective DLCs, and am about 100hrs into 4 right now.

Normally I play indie games since that's where my interests are and I grow tired of the AAA jackassery.

I mention that to illustrate that I do use and live the deck. But I guess I'm not creative enough to use the back buttons at all. So to the title question:

• What games do you play that make the most use of the back buttons?

• What functions are mapped to those buttons?

• Or are you like me and just never use them?

I'm starting a project along with my siblings to scan all of the family negatives, slides, and photos in an effort to preserve them.

I currently have Immich as well as Nextcloud Memories internally. That said, neither seem to be ideally suited to this task. I'm looking for a solution that would allow all siblings the option to view and upload scanned pics to the same library as we work through the shoeboxes full of memories. While Immich and Nextcloud both have account support, I can't seem to find a way to share a library amongst all accounts.

Does anyone have any recommendations for this project? I would then backup the scanned pictures on my server as well as B2 storage for redundancy and each sibling should have the option to download and backup the same library however they see fit.

I'm running an Unraid server as well as NextcloudPi on a Pi4. I also have two very basic VPSes that I rent.

I've looked at both ente.io and PiWiGo, but am currently having trouble getting either to work (still learning this selfhost stuff). I'd like to know if anyone has used either in this type of capacity before I spend more time trying to figure out what I'm doing wrong.

EDIT: I purchased the Brother L2690DW on a Clearance deal from Walmart and so far it has been a breeze using it between my Linux desktop and laptop.

My faithful Brother laser printer just poo'd itself. And since I've not purchased a new printer with additional features since I switched to full-time Linux, I thought I'd better ask around to make sure the document scanning, copy, fax (maybe once a year if that), and other features will work correctly.

The printer I have no worked without issue with Pop!_OS. Very straight forward plug in play other than a weird quirk with scaling when printing from Firefox built-in PDF handler vs the Document Viewer that ships with Pop.

Does anyone have any advice on potential pitfalls to avoid? I'd like to stick with brother because they seem to be the least evil of the printer corps, but I'm open to other suggestions.

I know this might be a bit too specific, but I'll ask anyway.

Is there any FOSS app for Android that supports tracing photos that can export the trace to SVG? I suppose this means it would have to support layers, and also support the ability to export individual layers instead of the whole project as SVG.

The intent is to use my Galaxy Tab with S-pen to trace objects in a photo in order create an SVG I can import into an app like Carbide Create (not FOSS either, but it's all I know how to sorta use at the moment) for cutting on a CNC. An example is a photo of one of my chickens. I wanted to turn this photo into a silhouette of said chicken and be able to cut that on a plank of wood. I did try Inkscape, but due to the background elements it would not pick up just the chicken during the "Trace Bitmap" operation. And honestly seems like a shame to not be able to use the S-pen for this type of project.

I run Linux on my home PC and I'm not sure if it will support using the tablet like a drawing tablet (Wacom type) like Windows can, but I suppose that is an option.

I looked at Infinite Design (not FOSS) but could not seem to find a free trace tool. There is a "pen" tool, but it wants to constrain it to a line and then you sorta pull the curves out of it. I apologize, I'm not really sure what all of the terms are.

I also looked at Excalidraw, which while being web app, runs reasonably well on Android. But some of the functions either don't work at all or I'm doing something wrong. I was able to import a photo and trace it, but couldn't find a way to export just the trace outline.

I'm guessing the answer is "no", but thought I'd ask for advice here regardless.

I don't have FB. Haven't for years. I ditched it long before I started giving a shit about Privacy, it's just so toxic and silly.

That said, I'm a retro gamer constantly on the hunt for holes in my NES/SNES collection and unfortunately the folks in my area seem to be quite a bit more active on FB Marketplace than Craiglist, Offerup, or Nextdoor For Sale pages. In the past I've asked my spouse to message the seller for me and then show up with cash and buy what they're selling. Increasingly, sellers are scared of scams and seem to be less responsive to this type of inquiry.

Is there anyway to minimize footprint in FB? Or perhaps a way to use Messenger without an account? You can browse the marketplace pages of your community without an account, but they'll pester you the whole time and you can't save your locale without signing in.

Or am I out of luck entirely? I thought about posting "In Search Of" type posts on Craiglists to bring the buyers to me, but my area has several of those already and I'm not after bulk lots or other platforms other than the old Nintendo stuff.

I do check Ebay as well and have found a few gems for decent prices and a local shop occasionally has some stuff that hasn't been completely picked over, or i show up right after someone sells their collection and that's rad, but that's rare.

I just picked up my second CRT last night. A free 27" Sony Trinitron. It has composite only, just like my flat tube Toshiba. Both seem to be working well.

I've been reading up on how to do the RGB mods and which models are supported. As well as the dangers of working in and around the guts of these monsters. I have a good soldering iron, but I'm not so good at it. I've looked around locally to see if there are any folks I could hire to do it for me and I'm having no luck. I'd rather not mail a boat anchor if I can help it.

Months ago I found a directory of modding services all over the country with a focus on console mods. I cannot for the life of me find that again to check and see if any of those folks are near me and do CRT work at all.

Failing all that, how hard is it assuming I take all necessary safety precautions? From pics and videos, the components look to be much larger than some I've tried in the past so I'm not sure if that'll help or hurt me if I just YOLO and try it.

The Sony is for sure a well documented RGB mod and I've found several resources for it. I can't find any info on the specific Toshiba yet and it has a VCR/DVD player built in, if that makes a difference.

Does anyone here use both Tasks.org and have it synced to Nextcloud? I'm not sure if I'm doing something wrong of expecting behavior that doesn't exist or what.

I have Tasks.org installed on Android phone and tablet and signed into my NC instance that I have. If I create a task in NC Tasks, it will sync down to the Android devices in Tasks.org. But it won't go the other way (tasks.org ->NC Tasks). I have a heap of reoccurring tasks in my phone app but it doesn't show up in the web portal of NC Tasks. But if I mark a NC Task complete on my phone, it will reflect that change in NC Tasks.

To further muddy the waters: I found a Linux app called Errands that I signed into NC in order to Sync. If I create a task in Errands, it does indeed show up in the NC Tasks list. It's like Tasks.org has a weird one way sync or something. I've scoured the settings and looked through open issues on Github but I'm not seeing anything that would 'fix' this, so I'm reaching out to my homies on Lemmy to see if anyone has suggestions.

Side NOTE: Errands is pretty neat, if you want a minimalist Tasks/Todo list app for Linux desktop.

I currently have a server running Unraid as the OS, which has some WireGuard integration built in. Which I've enabled and been using to remotely access services hosted on that server. But as I've expanded to include things like Octopi running on a Pi3 and NextcloudPi running on a Pi4 (along with AdGuardHome), I'm trying to determine the best way to VPN to my home network with the goal of reaching services I'm hosting, and do it safely of course.

I have a Netgear Nighthawk that has some VPN functionality built in that uses a OpenVPN account. Is that ok or would it be advisable to come in a different way?

I've been using HabitNow since February and it's a nice app. But I'd much prefer a FOSS alternative. The problem is that I'd like to keep my streak from HabitNow and apps either don't let you mark in the past or they require multiple clicks.

So far I've tried Loop Habit and Habit builder. These both fall in the "multiple clicks" camp.

Are there any other options to consider or should I just start clicking away at the 250+ days I've succeeded?

EDIT: habit builder does have a reasonably easy way to tap previous days that I missed. But has no reminders or notifications that I can find.

Is Termius the only cross platform emulator that includes Android as one of the platforms? It is quite good, in my limited experience, but too expensive for a hobbiest. I like that I can use my Linux desktop, MacOS laptop, and Android tablet/phone and the UX is the same across them all. The sync (trial for free, then charge) is great. But I'd be fine if it was something where I could DIY a sync method with something like Syncthing.

I'm aware of the likes of Alacritty, but no mobile app. And of course Termux is great for mobile, but no desktop versions.

It all boils down to wanting some sort of sync function either DIY or otherwise that includes hosts and SSH keys and while not as important, I do like the consistent UX between platforms. Is there something else to consider?