[-] j4k3@lemmy.world 1 points 7 minutes ago

Not sure if it is technically correct, but I think of it like the momentum of Earth's atmosphere. It takes a lot of momentum to alter the system. The days getting a little longer by a few minutes depending on latitude makes little difference. We are still dropping in average temps the further towards the poles.

Riding a bicycle everywhere for years in Southern California, this was something I would think about a lot on the commutes in the dark of winter, and the wind and rain patterns. Like here, I know if it will rain based on the wind direction alone. I only check the weather when I'm too lazy to go outside or something odd is happening. After the solstice there seems to be more turbulence that is added to the system. There is more of a back and forth between on an off shore flow patterns. It is our rainy season here, and we have nights get around 10°F cooler. This is when I break out my 40°F layers. On a bike, everything is still skin tight. I can shed some layers but don't like to stop to do that. I have specialty gear for every 10°F of temperature drop. If I wear 40-50°F gear in 50-60°F temps, I will sweat like crazy and then freeze from being wet. I wear my coldest gear a lot less than I did 15 years ago, but I still haven't needed it this year. I will in the months to come.

Most people are not connected to the weather and outside world very directly like this in the West. In my experience, the solstice marks the low point where I have around 6 weeks until things start getting better.

[-] j4k3@lemmy.world 5 points 7 hours ago

Anybody else always take these numbers and divide by 100k for a very rough overestimate of what kinds of Western labor an amount is capable of?

Essentially, this is saying 1500 people working together for control over dialogue are capable of reshaping the entire world view. I don't support genocide, but I can also see calculated, competent, and very capable people. When they put a number on such an objective, it is not some random guess buy. Just 1500 to take the reigns of the collective public mind.

[-] j4k3@lemmy.world 10 points 18 hours ago

If Klingons spoke Esperanto, it would be a thing

[-] j4k3@lemmy.world 4 points 1 day ago

I did not know JTAG was used like this, I thought it was passive in functionality

38
submitted 1 day ago* (last edited 1 day ago) by j4k3@lemmy.world to c/nostupidquestions@lemmy.world

Like the Raspberry π SoC is based on a television tuner box. The vast majority of the die is related to the TV tuner functions that are completely undocumented. What techniques exist to explore undocumented physical hardware? Are we limited to reverse engineering code to find when and how these undocumented areas are used, or are there other fuzzing type techniques to find relationships between memory, flags, and potential byte instructions?

This is an abstract thought and generalization that potentially patches a hole in my understanding. There is no broader purpose in asking.

[-] j4k3@lemmy.world 1 points 1 day ago

These guys seem to imply taking out a non load bearing wall does not require a permit: https://remodelingdoneright.nari.org/homeowner-resources/questions-to-ask/when-do-i-need-a-permit

That implies all the electrical, flooring, ceiling, and attic work is not a factor either. Altering a load bearing wall would require permitting. That is how I've always heard it said too. It is not a great primary source, bit I don't care more than a basic search and first link I see reply either, so it is confirmation biased as such.

[-] j4k3@lemmy.world 1 points 1 day ago

There is usually a dollar amount involved for what can be done before a permit is required. You're allowed to make minor changes required in the spirit of maintenance. So something like replacing a refrigerator and the old width being too small. If you cut the countertop to accommodate, no permit is legally required. The same can be said about almost every aspect of the home. That margin of what exactly is considered maintenance versus modification is what varies by area.

The other factor I've heard is that the changes must fall into what's undefined on the blueprints of record. If it is not specified in the blueprints, you are free to make the changes.

Again, I'm no expert here. I really wish I had the option to remove the mod badge when I only wish to post as a user. I could certainly be wrong. This is intended as a helpful but just water cooler talk amongst friends level conversation. When it comes to house mods and permits, this is how everyone I know does things.

[-] j4k3@lemmy.world 1 points 1 day ago

Maybe chemistry is an issue too. Septic is what, methane/(?)?

[-] j4k3@lemmy.world 0 points 1 day ago* (last edited 1 day ago)

Generally, regulations are for construction contractors. You likely won't pass some kind of plumbing inspection if you hired a contractor to do something that requires a permit, but otherwise you're free to do whatever. I'm no expert here, and you should be doing due diligence. My old man does inspecting type work in another type of industry and this is how it was explained to me, but that is an unrelated field. Different regions may have very different regulations.

[-] j4k3@lemmy.world 6 points 1 day ago

Too much fakery for my tastes. I want to hear the nuances of my partner, not some squeal or squeaky toy

[-] j4k3@lemmy.world 5 points 2 days ago

I only barely survived a crash with two cars while riding a bicycle to work. My spine is all messed up and it appears unfixable. I'm professionally incompetent due to the deeply unstable sleep patterns. Sleeping remedies cause inactivity that create further problems. I am the undead trapped in limbo.

[-] j4k3@lemmy.world 13 points 2 days ago* (last edited 2 days ago)

Depends on what you're taking. Like with my regular Adderall, I can cut doses for a few days and then get back the sharpness when I return.

Your diet plays a major role. Sugar intake, especially processed stuff will impact your stomach acid production and therefore how long you absorb the meds before they degrade. If you take an antacid it will boost things massively, but those will wreck your stomach microbiome and ultimately create worse effects on the days thereafter.

The one that amazes me is that, I prefer Adderall as a pain distraction more than any prescription pain drugs.

[-] j4k3@lemmy.world 13 points 3 days ago

Damn it! That is a pretty good measure for maturity. Do you have the self awareness and experience to regret your youthful dreams?

I certainly do. I fixated on car culture at 15. I didn't know I enjoy being a Maker most, or that applied science is the field of the ultimate Maker demigods. If I could go back and explain this to myself, it would likely be deeply fulfilling.

58
submitted 5 days ago by j4k3@lemmy.world to c/asklemmy@lemmy.world
78
submitted 1 week ago by j4k3@lemmy.world to c/asklemmy@lemmy.ml

At 40, I am convinced that we cosplay as adult characters to hide our inner child, mostly from ourselves. Some seem to allow the stresses of life and responsibilities to make the mask indistinguishable, but I doubt any truly make it real. Do you wear the mask of age over the eyes of your inner child? Does age hold a meaningful value to you beyond the comradery of shared experience?

44
submitted 1 week ago by j4k3@lemmy.world to c/asklemmy@lemmy.world

What is your temporal persistence? Like if you have some project you are putting off while trying to mull over a solution, how long do you generally keep that in mind until you find a solution or it fades from memory, replaced by something more productive. I'm not really talking about consciously shifting focus. I'm talking about the point when a project gets shelved unintentionally; you still hope to get back to it but usually do not. What is your temporal persistence like? Perhaps you complete every project, meaning you are less abstracted and that is fine too.

35
submitted 1 week ago by j4k3@lemmy.world to c/videos@lemmy.world
82
submitted 1 week ago by j4k3@lemmy.world to c/pics@lemmy.world

This is part of an interesting photo album on archive including pictures from Lake Tahoe and Santa Barbra, Catalina, and spots in Nevada during the gold rush. The photographer apparently ran a photography business in Goldfield. There are lots of photos of a fire where the town burned down along with several photos from when it was first established. The photos are mostly around 1900 but span from the 1890's to 1940's. It is basically someone's life in more general events and places (not personal experiences) from the gold rush era. They were not great at photography, but not terrible and this makes an interesting view into a slice of real life at the time.

https://archive.org/details/csfcp_000063/page/n93/mode/1up?view=theater

15
submitted 1 week ago by j4k3@lemmy.world to c/bicycles@lemmy.ca

The Balloon Cycle

There floated over the hamlet of Ville neuvye-la-Garenne, the other afternoon, in mid-air, a balloon. Suddenly it appeared to burst and fell rapidly toward the earth. Fearing that a disaster had occurred the terrified folk ran to the spot at which they expected the aerostat would reach the ground, when to their amazement they saw a parachute detach itself from the car and descend gently. Immediately the earth was touched one of the passengers jumped upon a small bicycle which he had brought with him from the aerial regions, and he disappeared in the direction of Levallois, in the neighborhood of Paris, as rapidly as the machine could carry him. The explanation of this singular occurrence is simple. The balloon was the Caliban, and the ascent was made from Levallios by Captain Capazza and M. Hervien, the latter being the cyclist. Their object was to test the possibility of a balloon being used for carrying war dispatches, and they assumed that an enemy succeeded in destroying it. Yet they proved that by means of the parachute they would be able to make good their escape and to outdistance their pursuers with the aid of a portable bicycle.—London Telegraph

https://archive.org/details/BRM_1894101801/page/n5/mode/1up?view=theater&q=Balloon

14
submitted 2 weeks ago* (last edited 2 weeks ago) by j4k3@lemmy.world to c/bicycles@lemmy.ca

Recently a bicycle race from Bath to Kensington, 106 miles, for the (captaincy) and (subcaptaincy) of the Middlesex Bicycle Club commenced in the Bath Market-place, the competitors being Mesate, Pearce, Leaver, Goulding, Percy, Tyne, Spencer, and Walker. The diameter of the driving wheels varied from 45 to 52 inches. The first six miles of the race, which was over a capital road, were done in a very short space of time. At Newbury, which is about midway, the first two riders to arrive were Walker and Tyne. Here the wheel of Tyne's machine collapsed, making him lose two hours in the first half of the race. He went on again, but was quite out of the running. The race was won by Mr. Walker, of the Middlesex Bicycle Club, who started at ten minutes past five a.m. and arrived at Kensington at fifteen minutes past three p.m. - the greatest speed on record for the distance.

Sorry for any errors.

So a modern rider typically takes at least 4 hours to do a century ride and that is at top amateur/pro levels. Averaging 25 miles per hour for that long is very difficult. Most avid club cyclists will average around 16 mph in the real world and can finish a century in around 6-7 hours.

In this race, it started at just after 5 am and was won by the finishing rider just over ten hours later at fifteen minutes past 3 pm. So the average speed of the winning rider was just over 10 miles per hour. You'll have to forgive me for not knowing metric time but in real units, the race was 170 km, and the average speed was 17 kph.

In terms of wheel size, the 700c wheels of today are around 28in in diameter. The racers here were riding between 45-52in. So 45in is 1.143m, and 52in is 1.32m

I speculate that these were likely Penny-farthing or Ordinary velocipedes

The frame is a single tube following the circumference of the front wheel, then diverting to a trailing wheel. A mounting peg is above the rear wheel. The front wheel is in a rigid fork with little if any trail. A spoon brake is usually fitted on the fork crown, operated by a lever from one of the handlebars. The bars are usually mustache shaped, dropping from the level of the headset. The saddle mounts on the frame less than 18 inches (46 cm) behind the headset.

One particular model, made by Pope Manufacturing Company in 1886, weighs 36 pounds (16 kg), has a 60-spoke 53-inch (130 cm) front wheel and a 20-spoke 18-inch (46 cm) rear wheel. It is fitted with solid rubber tires. The rims, frame, fork, and handlebars are made from hollow, steel tubing. The steel axles are mounted in adjustable ball bearings. The leather saddle is suspended by springs.[32]

Another model, made by Humber and Co., Ltd., of Beeston, Nottingham, weighs only 24 pounds (11 kg), and has 52-inch (130 cm) and 18-inch (46 cm) wheels. It has no step and no brakes, in order to minimize weight.[33]

A third model, also made by Pope Manufacturing Company, weighs 49 pounds (22 kg) and has forged steel forks. A brake lever on the right of a straight handlebar operates a spoon brake against the front wheel.[34]

All three have cranks that can be adjusted for length.

https://en.wikipedia.org/wiki/Penny-farthing

The original posted article from 1874 is on page 2 at the top right of the news paper archived here: https://archive.org/details/NPDP18740922/page/0/mode/2up?q=bicycle&view=theater

74
1892 hit hard (lemmy.world)
submitted 2 weeks ago by j4k3@lemmy.world to c/typography@lemmy.ca

Joke aside, there are several cool fonts in this one from 1892:

https://archive.org/details/CentralBoston1892Specimen/page/n73/mode/2up

91
submitted 2 weeks ago by j4k3@lemmy.world to c/bicycles@lemmy.ca

I didn't think aluminum rims or clinchers were a thing all the way back then.

Here are all the rest of the cycling highlights of The Iron Age like chainless drive too.

stationary trainer:

https://archive.org/details/IronAgeVol54Jul121894/page/n95/mode/1up?view=theater

::: spoiler Bonus riding lawn mower:

92
submitted 2 weeks ago by j4k3@lemmy.world to c/bicycles@lemmy.ca

I'm not sure I can link like that to archived images from a catalog. Page 279 is missing from the scan. This is the whole catalog: https://archive.org/details/sears-roebuck-catalogue-111/page/n136/mode/1up?view=theater The bicycle section starts on page 137 of the slider.

For reference:

At this early point in the history of license plates in the United States of America, none of the 45 states, territories, or the District of Columbia, was issuing its own plates.[1][2][3][4] The State of New York remained the only state that required vehicle owners to register their automobiles. The system of using the owner's initials as the registration number, begun in 1901, remained in effect. This would change in 1903 when a number was assigned to each owner to display on their vehicle. Across the country the increases in the number of automobiles was being noticed, and there were many cities, like Chicago, that had already begun to require their owners to register their vehicles.[5][6]

https://en.wikipedia.org/wiki/Vehicle_registration_plates_of_the_United_States_for_1902

1902

  • February 12 – The 1st Conference of the International Woman Suffrage Alliance takes place in Washington, D.C..
  • March 7 – Second Boer War: Battle of Tweebosch – South African Boers win their last battle over the British Army, with the capture of a British general and 200 of his men.
  • March 10 – Clashes between police and Georgian workers led by Joseph Stalin leave 15 dead, 54 wounded, and 500 in prison.[1]
  • April 2 – The Electric Theatre, the first movie theater in the United States, opens in Los Angeles.
  • May 20 – Cuba gains independence from the United States.
  • July 2 – Philippine–American War ends.
  • August 22 – Theodore Roosevelt becomes the first American President to ride in an automobile, a Columbia Electric Victoria through Hartford, Connecticut.
  • August 22 – A 7.7 earthquake shakes the border between China and Kyrgyzstan killing 10,000 people.
  • September 1 – The first science fiction film, the silent A Trip to the Moon (Le Voyage dans La Lune), is premièred at the Théâtre Robert-Houdin in Paris, France, by actor/producer Georges Méliès, and proves an immediate success.[7]
  • November 16 – A newspaper cartoon depicting U.S. President "Teddy" Roosevelt refusing to shoot a bear cub inspires creation of the first teddy bear by Morris Michtom in New York City.
  • December 30 – Discovery Expedition: British explorers Scott, Shackleton and Wilson reach the furthest southern point reached thus far by man, south of 82°S.

https://en.wikipedia.org/wiki/1902

44
submitted 2 weeks ago by j4k3@lemmy.world to c/3dprinting@lemmy.world

This is a killer reference source and entry point for many applications and projects.

Capstan actuators = rope twisted around two drums for gear reduction, but with limited range of motion.

https://www.youtube.com/watch?v=MwIBTbumd1Q

https://github.com/aaedmusa/Capstan-Drive

view more: next ›

j4k3

joined 2 years ago
MODERATOR OF