104
submitted 2 months ago by Showroom7561@lemmy.ca to c/bicycles@lemmy.ca

I wanted to share my experience with waxing my bike chains.

I was resistant to waxing my chains because it seems that a lot of people felt it was "too much work".

But having to constantly clean black shit off my chains after every ride, then spend time degreasing and re-lubing, I figured I'd try waxing when I got my gravel bike.

Now, thousands of KM later and having converted all three bikes to waxed, there's no way I'd go back. The time saved could be measured in hours per month.

First, the biggest complaint is chain prep. Yeah, regardless if you're waxing or not, you'll need to prep a new chain by removing the factory grease. With waxed, you do this once, and no more worrying about degreasing ever again. Make like easy and get Silca's chain stripper, and it's a 10 minute, one-step process.

Ongoing chain maintenance couldn't be easier. After every ride, give the chain a quick wipe (or not). My chain stays clean, even after a 200 km ride.

And if you ride in wet or dirty conditions? Guess what, you're in for a LOT of work if you lube your chain. With waxed, keep a second (or third) chain ready to go, and you just swap it out (10 seconds of effort). Take the dirty chain, give it a wipe if it's only been wet, or pour boiled water onto it if you want to "reset" the chain to bare metal. Then drop it into the waxing pot for a re-wax. You don't have to stand at the pot, so there's no real time commitment here. I've spent more time completely dirtying large microfiber cloths trying to get my chain "clean" when lubed (hint: it's never clean if you use a wet lube, not without solvents and an ultrasonic cleaner).

For actual immersion wax, I do it every 1000 km (sooner than you need to), and use a drip wax every 200 - 250 km to keep things fresh.

Honestly, wax is easier, cleaner, and takes less time to maintain vs wet lube.

The only downsides? The initial cost to get started. But this is offset by not having to replace chains or other components prematurely. You actually save money in the long-term when using waxed chains.

Some might argue that "you can't run waxed chains in muddy or constantly rainy conditions". Well, at the same time, your wet lube isn't really helping matters in those situations, either. Waxed is still better, and you can swap chains much faster than you can clean the grinding paste from a wet lubed chain.

Who would I not recommend waxed chains to? Someone who rarely uses their bike. Drip lube will be "good enough" in those cases. But anyone else would benefit from waxing their chain.

(page 2) 32 comments
sorted by: hot top controversial new old
[-] Pulptastic@midwest.social 2 points 2 months ago

Maybe I don’t do enough? I tried degreasing my chain in jars and with one of those chain cleaner things and saw no benefit but lots of extra work and mess.

Now I never degrease. Add lube to chain on the bike, several rotations to work it in, several rotations through a rag to clean it off. Takes three minutes and I do that monthly for the road bike, weekly for MTB, and after cleaning the bike. I never have to take the chain off until I replace it.

I use wet lube on the MTB and rock n roll extra dry on road bike.

[-] Showroom7561@lemmy.ca 1 points 2 months ago

Here's the problem:

The parts of the chain that wear out are on the inside; you can't wipe it clean.

When you use a standard lube, it attracts dirt inside the chain, and creates a grinding paste (i.e. that black crap), which will degrade the chain quickly.

As the chain wears, it wears on other components, so it cascades to the point where you'll get issues with shifting, chain skipping, etc., and components will need to be replaced.

Waxing fills the gaps where those inner components of the chain wears, effectively providing a buffer that dirt does not stick to.

You may not notice wear unless you are checking with a good quality chain checker tool, or when you start to experience issues.

How often you ride will also be a factor. Someone who rides 2000 km a year may not notice chain wear issues for 2 years. Someone riding 20,000 km might notice these problems every month.

And the more gears your bike has, the less chain wear you can get away with before it starts chewing through other components.

To me, it's an easy way to ensure longer-lasting, cleaner, quieter components, so I'll stick to it (no pun intended)!

load more comments (5 replies)
[-] captainlezbian@lemmy.world 1 points 2 months ago

We’re supposed to be lubing our chains?

[-] DarkThoughts@fedia.io 1 points 2 months ago

In my experience a lot of people are simply not aware of liquid chain wax like Squirt and think they have to put their chain in a heated pot or something.

[-] ghashul@feddit.dk 1 points 2 months ago

This is what I've been using for the last 12 years, and I've been happy. Immersion waxing seems interesting, but it does seem a bit daunting to me.

load more comments (3 replies)
[-] ContrarianTrail@lemm.ee 1 points 2 months ago

My chain maintenance takes about 2 minutes: soak it with some cheap multipurpose oil and wipe off the excess with an oily rag. I repeat this once every 2 weeks or so and it has worked good enough so far. When it's extra wet outside and my bike is covered in mud when I get back home I usually go thru it with an garden sprayer filled with hot water. Then I add the extra step of drying the chain with compressed air and re-lube it for storage after every ride.

[-] LukaszH@szmer.info 0 points 2 months ago

The time saved could be measured in hours per month.

Huh? I have two bikes I ride all year round – snow, rain, sun, on and off-road. Both of them pretty well maintained, if I say so myself. I've ridden over 5.5k km this year, and I think I've spent less than an hour total on cleaning and lubing my chains.

Make like easy and get Silca’s chain stripper, and it’s a 10 minute, one-step process.

10 minutes to degrease your chain with some fancy (and expensive, I presume) stripper? Damn, nobody's got time and money for that. You can do that in less than two minutes of work, including taking the chain off and putting in back. Just put your dirty chain in a small plastic bottle with some gasoline and shake it well for a minute. After that, run it through a piece of cloth and hang outside to dry. Done.

Honestly, wax is easier, cleaner, and takes less time to maintain vs wet lube.

Yeah, sure. Not having to cook my chains every 1k km takes sooo much time xD

load more comments (1 replies)
load more comments
view more: ‹ prev next ›
this post was submitted on 15 Oct 2024
104 points (98.1% liked)

Bicycles

3146 readers
2 users here now

Welcome to !bicycles@lemmy.ca

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!


Community Rules


Other cycling-related communities

founded 2 years ago
MODERATORS