100
Apparently, the last time I owned a working 3D printer Solutech was still in Business (lemy.lol)
submitted 2 days ago by Krauerking@lemy.lol to c/3dprinting@lemmy.world
21 comments fedilink hide all child comments

Man, what else have I missed?

top 21 comments
sorted by: hot top controversial new old
[-] Marvelicious@fedia.io 1 points 1 day ago

lol My new Carbon printed it's way through two rolls of 7 year old PLA last week and it's doing fine with the equally old ABS (all Hatchbox). I also have one old roll of PLA and a couple of PETG that are less useful, but they were no-name stuff that were troublesome new and are at least partially to blame for me giving up on printing back then.

Still, it's nice to see 3d printing is finally not too finicky to tolerate. With this machine, if I get a failure, it's a lot easier to narrow down the cause.

[-] IMALlama@lemmy.world 24 points 2 days ago

Tons of incremental updates.

Based on the printer in the picture I think you have one of the answers, lol.

The other answer is slicers, but if you're using Bambu's you've also seen that change now.

[-] Krauerking@lemy.lol 6 points 2 days ago* (last edited 2 days ago)

Hahaha yeah, my last printer I bought before this one was a prusa mk2 and I don't mean 2.5 I mean 2.

So I've never had a removable build plate even.
It feels a whole lot more than incremental.

I actually havent actually used the bambu slicer yet either. Just been using internal files and the whole app thing to print test pieces.

[-] bluewing@lemm.ee 7 points 2 days ago

If you are using Bamboo slicer, you are pretty much using Prusa slicer since it's directly taken from that with minor changes. I've noticed I've been slowly migrating away from Prusa slicer, a fork of Marlin, to Orca slicer - which is a fork of Bamboo. The reason is Prusa slicer is now concentrating on updating for the new Mk4 and XL printers with a nod to the Mini. I'm still quite content my Mk3s+ and don't need all those new updates for printers I don't own.

[-] Krauerking@lemy.lol 5 points 2 days ago

Yeah I think I am just gonna jump straight to orca slicer and skip Bambu's.

Prusa slicer was always the good one anyways. But yeah I felt slice settings kept getting faster than my printer could handle even when it worked.

[-] kitnaht@lemmy.world 8 points 2 days ago

I still have rolls of Solutech at the shop :D

[-] Krauerking@lemy.lol 3 points 2 days ago

Lucky. I had opened most of mine and I don't think my Ziploc bags held out as much water as I would have hoped.

It is a sad day, this printer deserves all the solutech. That filament was so good.

[-] offspec@lemmy.world 6 points 2 days ago

Dehydrating isn't impossible

[-] Krauerking@lemy.lol 5 points 2 days ago

I'm trying it in the dehydrator now but like 5-6 loops crumbled right off as I took it out of the bag and that seems like a bad sign.

[-] tonyn@lemmy.ml 6 points 2 days ago

Multi-Color Printing!!!

[-] lud@lemm.ee 7 points 2 days ago

Fucking hell, that's a lot of money.

I just bought a P1S but I don't plan on buying an AMS because they cost so much.

[-] Krauerking@lemy.lol 3 points 2 days ago

I got lucky and mine was free because I bought used... That is a whole lot of AMS going on in that photo.

[-] lud@lemm.ee 3 points 2 days ago

It's not free if you bought it, lol.

[-] Krauerking@lemy.lol 2 points 2 days ago

Hahaha yeah true but this cost me less than just the x1 new so let me have the slight win of "free" even though it's definitely not.

[-] Krauerking@lemy.lol 2 points 2 days ago

Yeah I just tested my first multi color... And jammed the printer with my brittle old filament...
ಥ⁠‿⁠ಥ

[-] tonyn@lemmy.ml 2 points 2 days ago

It probably has moisture, dry it in an old food dehydrator from goodwill or get a filament dryer.

[-] Krauerking@lemy.lol 2 points 2 days ago

Yeah it's been unused for 3 years and started it's life in swamp land so definitely wet. They are in the toaster oven on the dehydrate setting just unfortunately have to do that for every single roll except the single unopened solutech I had left.

[-] bluewing@lemm.ee 7 points 2 days ago

Yeah as with any new gotta have technology, there comes a point where a great weeding out of less than efficient providers happens. And it's been happening to many 3D companies for a while now.

[-] Krauerking@lemy.lol 4 points 2 days ago

Yeah it's a lot of different names and I thought I was keeping up but I guess I shouldn't expect the same companies from the days of repraps to be unchanged in this new era of auto printers.

[-] blaise@champserver.net 6 points 2 days ago

Damn I didn't know Solutech went out of business. I like(d) their filament and still have a couple spools left.

[-] Krauerking@lemy.lol 6 points 2 days ago

I was deeply upset when I went looking for them and realized there was nothing.

The QR code literally took me to a scam gambling site and that was my first clue.

this post was submitted on 18 Oct 2024
100 points (96.3% liked)

3DPrinting

15456 readers
320 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee