250
What is something you SHOULD cheap out on?
(feddit.nl)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 02 Sep 2024
250 points (97.3% liked)
Ask Lemmy
27268 readers
2955 users here now
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com.
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !askusa@discuss.online
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
founded 2 years ago
MODERATORS
If you're not a contractor, power tools. Buy the harbor freight version first when you need it. If you end up using it enough to break it, then you get a quality one.
I have never broken a 10 mm wrench, but I have lost a few. So I bought a ten pack on Amazon.
nice, you're good for 6 months
So long as he doesn't try to use them!
It's always the 10!
I keep one in my center console, my keychain, and random cheapies mixed in around loose tools, on top of whatever is part of the sets. Periodically we'll still have a hard time finding one when its needed and have to replenish.
Are they hanging out with the lost socks?
Sorry, but this only applies to drills and sanding machines. Maybe a bench grinder also you can cheap out on. Hand tools are fine to cheap out on also.
Circular saw, table saws, miter saws, angle grinders, etc..
Any spinning blade, if you cheap out, don't be surprised if you get life-alteringly injured when you "use it enough to break it". I was just helping some friends renovate where they had a dirt cheap miter saw and it was just about the most dangerous experience of my life.
If you are doing any big renovations, at least get makita, Milwaukee, or dewalt. You can get a TON of cheaper stuff second hand. Quality at a lower price. I got a professional older model hilti hammer drill at a tiny fraction of the price.
It really depends anymore...it can be a tough call.
I grew up using only quality tools, because cheap tools were truly shit until perhaps the 90's, at the earliest.
HF tools used to be utter shit, but their "branded" tools are good these days. The wrenches and sockets are as good a Craftsman used to be, and equal to the store brands from Home Depot and Lowes. And overpriced Matco/Snap On can kiss my ass. I have some of their tools, they're nice, but not worth the price.
Their branded cordless tools are good too. One thing they do differently is put the battery controller in the tool, while Milwaukee puts one in the battery. So don't do anything foolish with the battery.
I don't think they're as durable as Milwaukee, the plastic seems harder, so more prone to cracking. And the warranty isn't very long.
But with the massive cost difference, it's a good place to start.
But exactly, that is the difference between a drill and spinning sharp metal at high speeds.
If a drill breaks, it isn't going to send shards of metal-cutting fiber disc 20 meters per second at your face.
If a saw sucks ass like the one I used a few days ago, you can't safely cut through wood and you end up doing dangerous things like putting your body weight on the top of the miter saw to get it down all the way, gripping the piece closer to the blade to try to get it to cut better with less tear out or to not slip, etc... which can easily lead to a finger being cut off. It is MUCH more expensive in the US especially to have to deal with a dismembered finger than the cost difference between a chinese amazon $100 miter saw and $200 entry level 10 inch dewalt.
There are a ton of people who can't afford that. That is fine. Then spend $100 on good quality assorted hand saws. a $40 japanese pull saw, $30 for a Spear & Jackson hand saw, $40 for a pair of bacco chisels, and an angle cut box and you can do a lot more than that $100 miter saw much more safely at the cost of it being at half the speed.
There is a big difference between cheaping out on blades/never replacing them and cheaping out on the saw itself. I agree I wouldn’t get the absolute cheapest miter saw, but a relatively cheap one with good blades that are replaced often shouldn’t be significantly more dangerous than a more expensive one.
I think you hit the nail on the head. Prioritize quality on the sharp things. Works the same way with kitchen knives, not that you have to buy something expensive, but you should always keep it sharp. A sharp knife is dangerous, but a dull knife is dangerous and less predictable.
Seconded. This has been my strategy for accumulating personal tools.
Proper/professional grade stuff I have:
The rest is of a lot more dubious quality.
That is something I would disagree with. Especially when it comes to battery powered tools which seems to be everything nowadays.
If you go with one of the big brands you are almost guaranteed to get a spare part later. If you only use your drill once a year, the battery might be dead in a few years if you don't take care of it. Of course your battery might cost the same as a no name drill, but that is still a fair point IMO.
Now that you have a drill maybe you need a saw later. If you went with a big brand they typically have a large range of devices that work with the same batteries. So you can reuse your battery from the drill and also don't need another charger for that single device. This is also not limited to tools only. Maybe you need a light or a battery powered radio for something totally unrelated.
This is very situational. I'm not a contractor, but I spend a significant portion of my time doing hobbies that require power tools. I don't need a drill that will last for an entire day at a jobsite. Ryobi works fine for me. On the other hand, I wish I had never spent $600 on a cheap planer; I knew I'd want a better one eventually,, and sure enough, I found a need to upgrade after a few years. Now I've spent $3600 on planers. I could have just gone with the $3k one and saved myself $600.
If I'm going to use it once, I borrow it. If I'm going to use it every few months, I buy a cheap one. If I'm going to use it every week, then it's worth it to me to buy something I can keep for at least a decade or two.
Pretty good for anything that can kill you if it fails. Even beyond power tools.
So, for example, yes to drill. No to compressors, jacks, etc.
For jacks I always assume that it can break at any moment. That is why I put the spare tire under the car when I have the car lifted. If the jack breaks, the car will fall on the tire and not on my face.
Jack stands too. But not harbor freight ones
That’s pretty good advice, thanks.
I forget which brand it was, but I once bought a drill........charged the battery overnight, went to use it......and it died within 3 seconds. Literally 3 seconds. Thing cost like $100 a couple of years ago. Now I got a DeWalt, and it's fine.