luckily this is just a 32; i had a 70 from the same brand with the same INSANELY FUCKING STUPID STAND DESIGN that i had to find something for....literally at the most extreme edges of the thing, what the fuck is this? this is so fucking stupid, it cannot be meaningfully cheaper than a proper design and it looks fucking dumb as hell and surely this has pissed off 90% of people that wanted a TV and want to put it on a little stand like a normal fucking person right??
Centre stands need to be way more sturdy to hold it up. You can buy aftermarket VESA centre stands though if you can't wall mount it.
This right here.
The TV comes with the cheapest removable feet, because VESA mounts exist.
And considering the cost and relative light weight, are more or less a requirement
Exactly. I think an aftermarket VESA mount is pretty much required these days for modern TVs, that's the bad news. The good news is that there are plenty of options (center base, wall, swivel, etc), some very affordable, and they should last for multiple TV generations (check VESA pattern, weight limits).
But I get that these tiny, wide feet can be mind boggling at first, since TVs all used to have center stands for decades. Finally, TVs got too large, the cost savings and stability from two tiny feet won out over the alternative of the large, heavy single center base.
The wider the TV gets, the more stable a two-feet-at-the-ends design becomes compared to a single central foot.
Plus if you need anything else, VESA mounts are super-standard and you just get whatever you need then use it on every Tv you buy.
For those that live in apartments, there are VESA stands that mount to the back of your furniture, and others that use a clamp for tables, so you don’t have to put holes in your walls. I use one on my desk for a fairly wide monitor.
If you’re unfamiliar with VESA mounts, just take note of which of the two standards your device uses. These are going to be either 75x75mm or 100x100mm. Verify with a ruler, don’t rely on the literature to be accurate.
If you wanna be mega-bougie about it, you can get just the mounting plate, and there is couple hardware available to pair it with aluminum extrusion, if you really like that 2040/2080 extrusion.
Op didn't check the specs on the item he bought and is upset it's not perfectly tailored to his individual tastes.
You love to see it.
Putting a giant TV on a tiny stand is not normal.. Be mildly infuriated at yourself, not the manufacturer
OP blaming their shitty decisions on others. Why are you buying something without knowing its dimensions?
Fuck I hate people like this. The answer btw is pretty obvious. From a weight distribution perspective it's easiest to have two feet as wide apart as possible.
To be honest they think that people plan ahead for something like this..
And not have the TV hanging out in space to be knocked over.
How do you not do research on the dimensions of anything before buying something big like a TV?
So many people attacking OP and perhaps not remembering there was a time when nearly all flat panel TVs came on a pedestal mount. The designs were largely changed to mitigate claims and liability.
Nobody tell him about what TV makers expected of you when they were all CRTs…
They don't expect you to have a stand at all. They expect you to buy a separate wall mount piece and mount it directly on the wall.
they expect you to know the lengh of your own table that's why they put the lengh on the site, also, the legs are already short, how OP expext the TV to be stable with it even shorter??
You can make a stable mount without legs as wide as the TV. I have two 27in, 1440p monitors, which both came with stands that were probably 30% as wide as the monitors themselves. However, the stands were weighted and primarily steel (I'm assuming it was steel anyway) with a plastic shell. A TV doesn't need a wide base unless the company that made it is cheaping out and refuses to spend the money to make a weighted base.
The true reason is cost, those stands that are included nowadays are insanely cheap and flimsy. If you're buying a large TV, you should budget $30-$50 for a VESA mount.
I think the fucking stupid part of this post is the OP buying a TV oversized for the space they want it on.
I can't help you but I love this post.
Because you bought a really cheap TV and the little feet on the sides are cheaper than a center stand that needs to be much heavier and sturdier.
No one has seemed to mention the rise of sound bars. Center stands block sound bars and so so many people are using them now.
That's because TV's no longer come with decent audio because they are made as thin as possible for whatever reason.
I have that same TV (50"). They know what they're doing
Stand measurements are right on the box! They expect you to read them. 🤣
Cat
Same energy
Hahahaha what do you mean? This has to be satire. Nobody is that dense right? If it doesn't fit, don't buy it lmao.
You'd be first in line bitching that your TV fell over if they moved them in 6". Wall mounts are $18.... buy one
If the TV is VESA compatible, there are tons of third-party stand options.
Two tiny legs are cheaper than a large flipped “T” base for it to rest on.
At least you have a cat to hold it up
All of you saying you need center stands don’t realize how much heavier the stand needs to be for safety. For cheap TVs, you will get wide stands for freight reasons. They usually come with mounting mechanisms where you can get your own stand that will cost more than the TV itself.
Common sense people. If these shipped with center stands the cost would be double and you’d be complaining about how there’s no TV deals anymore.
You're clearly in the pocket of Big TV Stand.
They're expecting you to have a mount for your wall, already installed, even, from the last TV. So the legs are an afterthought, they're cheap, easy to remove and you'll probably toss them, they know. So they're enough to use for store display, no more.
I bought a center stand at Walmart, that mounts to the wall mount spot on the back of the TV. "Onn" brand for $18.
Works, but I do understand your frustration.
Because it is genuinely is way cheaper to include 4x 4" plastic legs, than a steel center stand capable of withstanding the torque.
For people who wall mount and for those with wide tv stands these work fine and save probably $30 / TV, and produce less overall waste.
I don’t understand why most of the commenters are against you, i find the change from center stands to edge stands annoying. Especially since it seems difficult find smaller TVs nowadays
There's nobody but yourself to blame in this one lmao
Pepperidge Farm remembers when TVs didn't even come with a "stand". It was just a big box with no real "mounting" options.
I can still remember the sound my back made when I picked up my first 32" TV.
You should be mounting in on the wall anyway. Unless you want your cat to tip it over, that is.
Ah yes the installed mount in my....apartment I rent and cannot install things into
It's way cheaper to produce such stands (they can be way less sturdy).
Also stop wide-shaming your perfectly nice 32" cat.
Its recommended that the surface that you put your TV on be a couple inches wider than your TV.
Sketchy fast math says a 32" TV will be roughly 30" wide .... Feet appear to be 3" in on each side which would put them at 24" on center... What kind of umpa lumpa ass table do you have? If that is your only option you can get a treated 8' decking board for like $8, have Lowe's cut it in half and throw it on top of the table to extend it.
I don't have anything to say about the TV sitch but your cat is pretty.
Home to all things "Mildly Infuriating" Not infuriating, not enraging. Mildly Infuriating. All posts should reflect that.
I want my day mildly ruined, not completely ruined. Please remember to refrain from reposting old content. If you post a post from reddit it is good practice to include a link and credit the OP. I'm not about stealing content!
It's just good to get something in this website for casual viewing whilst refreshing original content is added overtime.
Rules:
1. Be Respectful
Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.
Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.
...
2. No Illegal Content
Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.
That means: -No promoting violence/threats against any individuals
-No CSA content or Revenge Porn
-No sharing private/personal information (Doxxing)
...
3. No Spam
Posting the same post, no matter the intent is against the rules.
-If you have posted content, please refrain from re-posting said content within this community.
-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.
-No posting Scams/Advertisements/Phishing Links/IP Grabbers
-No Bots, Bots will be banned from the community.
...
4. No Porn/Explicit
Content
-Do not post explicit content. Lemmy.World is not the instance for NSFW content.
-Do not post Gore or Shock Content.
...
5. No Enciting Harassment,
Brigading, Doxxing or Witch Hunts
-Do not Brigade other Communities
-No calls to action against other communities/users within Lemmy or outside of Lemmy.
-No Witch Hunts against users/communities.
-No content that harasses members within or outside of the community.
...
6. NSFW should be behind NSFW tags.
-Content that is NSFW should be behind NSFW tags.
-Content that might be distressing should be kept behind NSFW tags.
...
7. Content should match the theme of this community.
-Content should be Mildly infuriating.
-At this time we permit content that is infuriating until an infuriating community is made available.
...
8. Reposting of Reddit content is permitted, try to credit the OC.
-Please consider crediting the OC when reposting content. A name of the user or a link to the original post is sufficient.
...
...
Also check out:
Partnered Communities:
Reach out to LillianVS for inclusion on the sidebar.
All communities included on the sidebar are to be made in compliance with the instance rules.