95
I have a basic shoe design (pixelfed.sdf.org)
submitted 2 weeks ago by ExtremeDullard@lemmy.sdf.org to c/3dprinting@lemmy.world
18 comments fedilink hide all child comments

As you know, I started designing custom 3D-printed shoes for myself. This is a follow-up.

So, I spent some time modeling a basic, thin-walled shoe. Nothing fancy, just a quick something to test the fit and do my first TPU print - although I'll probably start with test pieces before printing this doozie.

One shoe fits on the bed of our Prusa Mk4 - barely.

It's a 17-hour print. Yikes! I think I'll probably do this over the next week-end, otherwise my colleagues will kill me.

The support is mostly inside the toe box and promises to be a real b*tch to remove:

TPU supports

The shoe is very close-fitting, but I've left 2mm all around inside: if I mess up, or if the TPU shrinks like I think it will, it has a chance to remain wearable. If it doesn't, I'll simply put a sock on.

Right shoe model

Stay tuned 🙂

top 18 comments
sorted by: hot top controversial new old
[-] FuglyDuck@lemmy.world 19 points 2 weeks ago* (last edited 2 weeks ago)

I would suggest air holes, to prevent sweaty feet (and massive chaffing.) (if it's TPU and thin enough, you can probably add them with some leather punches, mind.)

Unless your goal is a shoe for jumping in mud puddles?

[-] ExtremeDullard@lemmy.sdf.org 9 points 2 weeks ago

First order of business is making sure it fits, before I spend 2 hours punching holes in the model 🙂 There's another thing I need to add: sole patterns, to prevent slippage. Right now the soles are totally bald, which isn't ideal. But this is just a test print.

[-] FuglyDuck@lemmy.world 5 points 2 weeks ago* (last edited 2 weeks ago)

So... I wonder.... about the sole texture...

what would happen if you increased the thickness of the sole, and then had zero solid layers on bottom to create easy tread. I'm thinking a few layers of dense gyroid, then solid to layers above it.

Or if you wanted even more cushion... a few layers of tread with a couple solid layers, then more infill, and solid top players?

if you think that might work... i'd suggest just doing a very thin print to check it out. (Like, the tread and maybe the insole of just the toe?) it might need tweaking. especially if you add an air-cushion layer.

edit: i know prusa slicer has ways of changing infill percentages etc as a function of layer height, and I would assume most slicers do these days. Another setting to look at changing for tread would be the extrusion width, juicing the infill extrusion width should make the more sturdy, whatever pattern you do select for it.

gyroid would create a squiggly patter on the bottom of it. hex might be interesting too, or maybe hilbert curve, which is 'space filling' fractals. Gyroid would be interesting for any cushion section because it would create two large pockets of air instead of many small pockets.

[-] riodoro1@lemmy.world 8 points 2 weeks ago

This. There is a reason why even pool shoes are breathable. This is a bowl for sweat and your foot isn’t going to like it inside.

[-] NuXCOM_90Percent@lemmy.zip 2 points 2 weeks ago

I mean, it is pretty obvious they care less about using the shoes and more about building a Brand for whatever reason.

I'll also add that this is going to chafe like hell. And even if OP has perfect orthopedic health... they won't after wearing these for an extended period of time. All but the cheapest of crocs put a bit of effort into the footbed to cushion things and a layer of rigid TPU ain't it.

[-] reddwarf@feddit.nl 13 points 2 weeks ago

Ah yes, the famous escort boots as seen in the Series IV episode "Justice" of the TV show Red Dwarf! 😃

[-] ExtremeDullard@lemmy.sdf.org 2 points 2 weeks ago

Hehe yes, they do look a bit like that.

Now you make me want to watch a few episodes tonight... 😃

[-] reddwarf@feddit.nl 4 points 2 weeks ago

You should, there are not many TV shows as re-watchable as Red Dwarf 😀

[-] ExtremeDullard@lemmy.sdf.org 2 points 2 weeks ago* (last edited 2 weeks ago)

Tell me about it... I have all the seasons on DVD, and all Brittas Empire seasons too. They just don't make good comedy like that no more.

[-] dutchkimble@lemy.lol 1 points 2 weeks ago

There’s your shoe model name - the Rimmers!

[-] Imgonnatrythis@sh.itjust.works 12 points 2 weeks ago

There's always that guy that says this, but doesn't look like he's said it yet, so I'll be the guy. Even with Tpu, the layered print nature of this will make a microchannel rich environment that is pro-microbe and with or without venting and with or without socks, this is a setup for some stinky feet.

[-] Bosht@lemmy.world 5 points 2 weeks ago

Not to mention it'll shed micro plastics constantly

[-] ExcessShiv@lemmy.dbzer0.com 7 points 2 weeks ago

Probably at about the same rate as normal sneakers, so if you can live with that then these shouldn't be an issue in that regard

[-] ExtremeDullard@lemmy.sdf.org 4 points 2 weeks ago* (last edited 2 weeks ago)

All valid concerns, thank you for raising them: this hadn't crossed my mind.

But I'm not too concerned for the following reasons:

  • My current pair of pool shoes are commercial models I thermo-reformed with hot air (if you're interested in that process, I can post a video if you'd like). Pool shoes are made of vinyl: let me tell you, reforming vinyl at close to decomposing temperature is a nasty toxic fumes affair. Whatever drawbacks TPU may have can't be any worse for my health.

  • They'll be used mostly underwater in chlorinated water for a couple of hours per week tops.

  • My feet don't sweat much anymore.

[-] uninvitedguest@lemmy.ca 7 points 2 weeks ago

Rather than print it flat, is there an angle you could print it at that would allow for eliminating most/all of the interior supports? E.g. toe angled down, heel angled up.

I've never printed TPU for such a long duration. Do you have it printing directly from the filament dryer?

[-] ExtremeDullard@lemmy.sdf.org 2 points 2 weeks ago* (last edited 2 weeks ago)

Rather than print it flat, is there an angle you could print it at that would allow for eliminating most/all of the interior supports? E.g. toe angled down, heel angled up.

Ooh that's a GREAT idea! I plain didn't think about that but it totally makes sense. Thanks! I'll goof around with that tonight in the slicer to see what's the minimal resource utilization I can achieve. Hell, I might even be able to squeeze both shoes in there.

I've never printed TPU for such a long duration. Do you have it printing directly from the filament dryer?

Yes. My plan is to load the brand-new roll in the dryer on Thursday and set it to dry at 70C overnight, print a bunch of test parts on Friday, then if they pass muster, start the big print on Saturday morning.

[-] IMALlama@lemmy.world 3 points 2 weeks ago

That looks kind a very nicely designed model!

I suggest a much smaller TPU print with supports so you can get a feel for post processing needs. If you print the part well the only way to remove them is with a knife or snips.

[-] ExtremeDullard@lemmy.sdf.org 1 points 2 weeks ago

That's the plan: get used to the material before wasting 80 yards of the stuff on a print.

this post was submitted on 09 Dec 2024
95 points (97.0% liked)

3DPrinting

15782 readers
237 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee